The VTech VS113-5 is a DECT 6.0 cordless phone system with Bluetooth wireless technology, including one telephone base and five cordless handsets. It supports cell phone pairing, digital answering system, Smart Call Blocker, caller ID announce, push-to-talk (PTT) intercom, and expandable up to 5 handsets. Features a backlit display, 1000-name phonebook, 50 caller ID log, and 22-minute recording time. Below are the key specifications, installation, operation, programming, and troubleshooting instructions.
Verify all parts are included: Telephone base, five cordless handsets with chargers, five battery packs (BT162342/BT262342, 2.4V 300mAh Ni-MH), five battery compartment covers, five belt clips, power adapters for base (6V DC @600mA) and chargers (6V DC @400mA), telephone line cord, quick start guide. Install and charge handset batteries before use. Save sales receipt and packaging for warranty.
CAUTIONS: Use only supplied adapters and batteries. Save these instructions. Charge batteries for at least 30 minutes (full charge in 16 hours) to achieve up to 10 hours talk time and 5 days standby.
Handset Battery Installation: Open battery compartment cover, insert battery pack with label facing down and wires toward the door, replace cover.
The VS113-5 is a DECT 6.0 cordless phone with Bluetooth. Handset layout: LCD display, VOL p / VOL q CID for volume/scrolling/caller ID, MENU/SELECT, OFF/CANCEL, PHONE/ (home calls), CELL/ (cell calls), INT (intercom), REDIAL/PAUSE, VOICE/MUTE/DELETE, TONE*, # (quiet mode), speakerphone button, microphone, charging contacts, headset jack, CALL BLOCK, QUIET#, PTT. Base layout: LCD display, VOL +/-, MENU/SELECT, PTT/FLASH, INT, ANS ON/OFF, PLAY/STOP, X/DELETE, /REPEAT, /SKIP, FIND HANDSET, HOME/FLASH, CELL, speaker, microphone, CALL BLOCK. Features: Bluetooth pairing (up to 2 cells/1 headset), phonebook download, remote voice control, Smart Call Blocker, answering system, caller ID, intercom, chain dialing, ECO mode. Range: 50 ft indoors, 300 ft outdoors; Bluetooth ~15 ft.
Applications: Home/office telephony with cell integration.
CAUTION! To prevent electrical shock, unplug before cleaning. Use only in dry locations. Do not install base above 2 meters.
WARNING! Reduce risk of fire/shock: Do not use near water; avoid rough handling. Do not disassemble. Keep 6 inches from pacemakers. Use only specified adapter (Input: 120V AC 60 Hz, Output: 6V DC @600mA base/@400mA charger) and Ni-MH batteries (BT162342/BT262342); risk of explosion if wrong. Dispose per local codes. Operate in 0°C - 50°C, 5%-95% humidity. Unplug during storms. Privacy not guaranteed; potential interference with TV/VCR.
Base: Plug power adapter into base and unswitched outlet. Plug telephone line cord into base and wall jack (use DSL filter if subscribed). Charger: Plug power adapter into unswitched outlet. Place handsets in base/chargers; CHARGE light on. Registration: Place handset in base cradle for auto-registration. For additional handsets, charge 30 min, then register via base (press FIND HS twice). Set up via Voice Guide: Follow prompts for date/time, Smart Call Blocker, and Answering System.
CAUTIONS: Use supplied components. Charge batteries 16 hours. Place base centrally, away from interference.
Charge handsets 16 hours. Press HOME/FLASH for dial tone. Test incoming call: Rings, answer with HOME/FLASH. Test Bluetooth pairing and cell calls. Check ECO mode icon. Test answering system: Leave message, play back via base. If "Out of range", move closer to base. Follow Voice Guide for initial setup.
Phonebook: MENU > Phonebook > Add contact, enter name (up to 15 chars)/number (up to 30 digits) > SAVE. Search: Press / or enter letter. Dial: Scroll to entry > HOME/CELL. Delete: Scroll > DELETE > SELECT. Download from paired cell. Speed dial: MENU > Settings > Voicemail > Set speed dial, enter number (up to 20 digits). Answering system: Record memo via MENU > Answering sys > Record memo. Remote access: Dial base, enter code 19; commands like play (5), delete (3).
Default settings indicated by asterisks (*).
| Setting | Default | Options | Comments |
|---|---|---|---|
| Ringer Volume | On* | Off, 1-5 | MENU > Sound > Ringer volume |
| Ringer Tone | Tone 1* | Multiple tones | MENU > Sound > Ringer tone (home/cell) |
| Listening Volume | Medium* | 1-6 | VOL +/- during call |
| Language | English* | English, Français, Español | MENU > Settings > Voice language |
| Date/Time | Manual* | Auto via CID | MENU > Set date/time |
| Bluetooth | Off* | On/Off, Pair devices | MENU > Bluetooth > Add device |
| Smart Call Blocker | On* | On/Off, Profiles | MENU > Call block > SCB |
| Answering Rings | 4* | 2-6, Toll saver | MENU > Answering sys > Rings |
Admin Access: MENU for settings; default remote code 19.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| No dial tone | Line cord loose; power off | Check connections; replug power |
| Handset does not ring | Ringer off; Quiet mode on | Adjust ringer; press # to off |
| Poor audio | Interference; low battery | Reduce distance; charge battery |
| Registration failed | Low battery; another handset in use | Charge 30 min; retry after 5 min |
| Battery not charging | Dirty contacts; faulty charger | Clean contacts; try another charger |
| Cannot pair Bluetooth | Out of range; incompatible | Place near base; enable Bluetooth, restart |
| Phone rings but goes to voicemail | Voicemail intercept | Set answering rings earlier than cell VM |
Care: Wipe with damp cloth. Dispose batteries properly. Service: 1-800-595-9511.