The VTech VS112-27 is a DECT 6.0 cordless phone system with Bluetooth wireless technology, including one base and two handsets. It supports cell phone pairing, digital answering system, Smart Call Blocker, caller ID announce, and expandable up to 5 handsets. Features include a backlit display, 1000-name phonebook, 50 caller ID log, and 22-minute recording time. Below are the key specifications, installation, operation, programming, and troubleshooting instructions.
Verify all parts are included: Telephone base, two cordless handsets, two battery packs (BT162342/BT262342 or BT183342/BT283342, 2.4V Ni-MH), two battery covers, two belt clips, handset charger and power adapter, telephone base power adapter, telephone line cord, quick start guide. Install and charge handset batteries before use. Save sales receipt and packaging for warranty.
CAUTIONS: Use only supplied adapters and batteries. Save these instructions. Do not burn or puncture batteries.
Handset Battery Installation: Align battery pack connector with socket in handset battery compartment. Slide battery into place. Replace battery compartment cover. Charge for at least 12 hours initially.
The VS112-27 is a DECT 6.0 cordless phone with Bluetooth. Handset layout: Visual ringer indicator, MENU/SELECT, / (scroll up/volume increase/phonebook), / (scroll down/volume decrease/caller ID), OFF/CANCEL, QUIET, CALL BLOCK/VOICE, REDIAL/PAUSE, CHARGE light, /CELL, HOME/FLASH, dialing keys (0-9, *, #, 1 for voicemail), TONE*, (speakerphone), MUTE/DELETE, earpiece, LCD display, speaker, microphone, headset jack. Base layout: LCD display, message controls (/REPEAT, X/DELETE, /SKIP, /PLAY/STOP), ANS ON/OFF, FIND HS, VOL +/-, speaker, softkeys, navigation keys, dialing keys, HOME/FLASH, CELL, INT. Features: Bluetooth pairing (up to 2 cells/headsets), phonebook download, remote voice control, Smart Call Blocker, answering system, caller ID, intercom, chain dialing, ECO mode. Range: 50 ft indoors, 300 ft outdoors; Bluetooth ~15 ft.
Applications: Home/office telephony with cell integration.
CAUTION! To prevent electrical shock, unplug before cleaning. Use only in dry locations. Do not install base above 2 meters.
WARNING! Reduce risk of fire/shock: Do not use near water; avoid rough handling. Do not disassemble. Keep 6 inches from pacemakers. Use only specified adapter (Input: 120V AC 60 Hz, Output: 6V DC @400mA) and Ni-MH batteries (BT162342/BT262342); risk of explosion if wrong. Dispose per local codes. Operate in 0°C - 50°C, 5%-95% humidity. Unplug during storms. Privacy not guaranteed; potential interference with TV/VCR.
Base: Plug power adapter into base and electrical outlet not controlled by wall switch. Plug telephone line cord into base and wall jack. For DSL, install filter. Charger: Plug power adapter into outlet. Place handset in charger; CHARGE light on. Registration: Place handset in base cradle for auto-registration. For additional handsets, charge 30 min, then register via base (press FIND HS twice).
CAUTIONS: Use supplied components. Charge batteries 12 hours. Place base centrally, away from interference.
Charge handsets 12 hours. Press HOME/FLASH for dial tone. Test incoming call: Rings, answer with HOME/FLASH. Test Bluetooth pairing and cell calls if applicable. Check ECO mode icon. If "Out of range", move closer to base. Test answering system on base.
Phonebook: Enter number > MENU > SELECT > Enter name > SELECT to save. Review: Press / . Dial: Scroll to entry > HOME/FLASH. Delete: Scroll to entry > DELETE > SELECT. Caller ID: Press / to review; MENU > To Phonebook to save. Call Block: Press CALL BLOCK while idle > Add number > Enter number > SAVE. Answering system: Refer to base manual for greeting recording. Deregister: Press FIND HS on base twice (deregisters all handsets).
Default settings indicated by asterisks (*).
| Setting | Default | Options | Comments |
|---|---|---|---|
| LCD Language | English* | English, Français, Español | MENU > 364# to reset to English |
| Ringer Volume | On* | Off, 1-5 | MENU > Ringers > Ringer volume |
| Handset Volume | Medium* | 1-6 | / +/- during call |
| ECO Mode | On* | On, Off | Activates automatically in range |
| Quiet Mode | Off* | On/Off | Press and hold QUIET |
| Any Key Answer | Off* | On, Off | MENU > Answering > Any key answer |
Admin Access: MENU for handset settings; base controls for answering system.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Handset does not ring | Ringer off; Quiet mode on | Adjust ringer volume; press QUIET to turn off |
| No dial tone | Not registered; out of range | Re-register handset; move closer to base |
| Poor audio | Interference; low battery | Reduce distance from base; charge battery |
| Registration failed | Another handset in use; low battery | Charge 30 min; retry after 5 min; ensure only one handset registers at a time |
| Battery not charging | Dirty contacts; faulty charger | Clean charging contacts; try another charger or location |
| Cannot pair Bluetooth | Out of range; incompatible device | Place cell near base; ensure Bluetooth enabled; restart pairing process |
Care: Wipe with damp cloth. Dispose batteries properly. Service: 1-800-595-9511.