The VTech PS1350 is a DECT cordless telephone with integrated answering machine, featuring a 2.4-inch color display, nuisance call blocker, phonebook storage (up to 1000 entries), speed dial (9 locations), call history (up to 20 calls), adjustable ringer and volume, voicemail indicator, and support for up to 4 handsets. It supports multilingual prompts (English, German, Spanish, French, Italian, Dutch, Portuguese) and is designed for residential use. Below are the key specifications, installation, operation, programming, and troubleshooting instructions.
Unpack the phone and ensure all components are present: base unit, cordless handset, battery pack (Ni-MH AAA 850mAh 1.2V), battery compartment cover, belt clip, telephone line cord, power adapter (6V DC 0.45A), user's manual. For battery installation: Insert the battery pack into the handset compartment with correct polarity (+/-), then slide the cover into place. Charge new battery by placing handset in base for 12 hours before first use. Maximum battery life: Up to several hours talk time, several days standby. Place base away from water, heat sources, and interference sources like microwaves. Expandable to 4 handsets.
WARNING! Failure to read and follow all instructions carefully before installing or operating this control could cause personal injury and/or property damage. Save these instructions.
The VTech PS1350 is a DECT cordless phone with built-in answering machine (up to 3 minutes per message, unlimited option), caller ID (subscription required), phonebook (1000 locations), speed dial (9 numbers), redial (last 20 numbers), adjustable volume (7 levels), ringer (20 melodies/OFF), and nuisance call blocker. Supports basic calling, paging, internal calls (with additional handsets), and remote access. Handset layout includes dedicated buttons for TALK/, OFF/, VOL +/-, MUTE, BLOCK, MENU/, and soft keys. The base has speakerphone and ON/OFF for TAM.
Applications: Residential cordless telephony with answering system; Single or multi-handset setup.
CAUTION! To prevent electrical shock/equipment damage, unplug before installation. Use only supplied adapters. If in doubt about wiring, consult qualified electrician.
WARNING! Do not use on circuits exceeding 100-240V AC 50/60Hz; improper use can cause shock/fire. All wiring must conform to local/national electrical codes. Avoid use during storms, near gas leaks, or with medical devices (maintain 6-inch distance). Dispose of batteries per local regulations (WEEE). Install DSL filter if using DSL/high-speed internet. Use only Ni-MH rechargeable batteries; do not mix types or use non-rechargeables.
Plug telephone line cord into base and wall jack (use DSL filter if needed). Plug power adapter into base and unswitched outlet. Install battery in handset (align terminals, snap cover). Place handset in base to charge for 12 hours. For additional chargers (PS1351/PS1352): Plug adapters into outlets. Set up answering machine: Use menu to set date/time, record announcement, and select answer mode.
After charging, press TALK/ and listen for dial tone (wait 1-2 seconds). Test by dialing a number and adjusting volume. Verify CHARGE light on base. Play a test message on TAM.
Access phonebook via MENU > Phonebook.
Speed Dial: MENU > Speed Dial > Select 1-9 > Options > Phonebook or Manual > Save.
Call Blocker: BLOCK > Black List > Add/View/Edit/Delete.
Changes activate immediately.
Adjust via MENU: Date/Time, Ringer, Language, Block Mode.
| Setting | Default | Options | Comments |
|---|---|---|---|
| Ringer Melody | Melody 1 | 20 melodies | MENU > Sounds > Ringer > Select > Save |
| Ringer Volume | Level 4 | Off/1-7 | MENU > Sounds > Ringer Volume > Adjust |
| Handset Volume | Level 4 | 1-7 | Adjust during call with VOL +/- |
| Language | English | 7 languages | MENU > Settings > Language |
| Block Mode | Off | Block All/Allow VIP/Block Blacklist/Off | MENU > Settings > Block Mode |
| TAM Recording Length | 3 min | 30s/1min/2min/3min/Unlimited | MENU > Answering Machine > TAM Settings |
| Remote Access PIN | 0000 | 4 digits | MENU > Answering Machine > Remote Access > PIN |
Set Time/Date: MENU > Settings > Date & Time > Enter format/date/time > Save.
Clear Voicemail Indicators: Not specified; contact provider.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Telephone does not work at all | No power, low battery. | Check adapters, charge 12 hours; unplug/replug power (15 sec); test with another phone. |
| No dial tone | Wiring issue. | Check line cord; test jack; contact provider for wiring/DSL issues. |
| Poor audio quality | Out of range, interference. | Move closer; avoid electronics; install DSL filter; centralize base. |
| Cannot store numbers | Memory full (1000 max). | Delete entries. |
| Handset does not ring | Ringer off. | Set ringer ON; check settings. |
| Low battery alert | Battery low. | Charge 12 hours; replace if needed. |
Handset Registration: MENU > Settings > Base Settings > Registration > Enter PIN > Press PAGE on base.