The VTech IS8151 is a DECT 6.0 cordless phone with Bluetooth wireless technology, supporting cell phone pairing, digital answering system, Smart Call Blocker, caller ID announce, push-to-talk, and expandable up to 12 handsets. It features a backlit display, 200-name phonebook, and 22-minute recording time. Below are the key specifications, installation, operation, programming, and troubleshooting instructions.
Verify all parts are included: Telephone base, cordless handset(s), battery pack(s) (BT183342/BT283342), battery cover(s), belt clip(s), handset charger(s), power adapter(s), telephone line cord, quick start guide. Install and charge handset battery before use. Save sales receipt and packaging for warranty.
CAUTIONS: Use only supplied adapters and batteries. Save these instructions.
Handset Battery Installation: Insert battery into compartment with label "THIS SIDE UP". Replace cover. Charge for 12 hours initially; indicators show charging status.
The IS8151 is a DECT 6.0 cordless phone with Bluetooth. Base layout: LCD, CELL lights, CALL BLOCK, FIND HS, message controls, antenna, ANS ON, line keys, speaker, softkeys, navigation, MUTE/VOICE, REDIAL/PAUSE, VOL +/-, FLASH/PTT, dialing keys. Handset layout: LCD, VOICE, PTT, softkeys, line keys, VOL/CID, OFF/CANCEL, QUIET #, CALL BLOCK, REDIAL/PAUSE, CHARGE light, HOME/FLASH, dialing keys, speaker, MUTE/DELETE, headset jack. Features: Bluetooth pairing (up to 2 cells/headsets), phonebook download, remote voice control, answering system, Smart Call Blocker, PTT, chain dialing, equalizer. Range: Cordless 50 ft indoors/300 ft outdoors; Bluetooth ~15 ft.
Applications: Home/office telephony with cell integration.
CAUTION! To prevent electrical shock, unplug before cleaning. Use only in dry locations. Do not install base above 2 meters.
WARNING! Reduce risk of fire/shock: Do not use near water; avoid rough handling. Do not disassemble. Keep 6 inches from pacemakers. Use only specified adapter (6V DC) and Ni-MH batteries; risk of explosion if wrong. Dispose per local codes. Operate in 0°C - 50°C, 5%-95% humidity. Unplug during storms.
Base: Plug power adapter and line cord into base and outlets/jack. For DSL, use filter. Wall mount: Adjust bracket. Charger: Plug adapter into outlet. Registration: Place handset in base (auto-registers) or press FIND HS on base, then QUIET # on handset.
CAUTIONS: Use supplied components. Charge batteries 12 hours.
Set date/time via menu. Follow voice guide for setup. Press HOME for dial tone. Test calls on home/cell lines. Check Bluetooth pairing and download.
Phonebook: MENU > Phonebook > Add contact, enter number/name/type > SAVE. Speed dial: For voicemail, MENU > Settings > Voicemail #. Answering system: Record announcement via MENU > Answering sys > Announcement > Record annc. Deregister: MENU > Handset > Deregister.
Default settings indicated by asterisks (*).
| Setting | Default | Options | Comments |
|---|---|---|---|
| Language | English* | English, Français, Español | MENU > Settings > Set language |
| Ringer Volume | Medium* | Off, Low, Medium, High | MENU > Ringers > Ringer volume |
| Answering Rings | 4* | 2-6, Toll saver | MENU > Answering sys > # of rings |
| Recording Time | 3 min* | 1-3 min | MENU > Answering sys > Recording time |
| Bluetooth | Off* | On/Off, Pair devices | MENU > Bluetooth > Add cell/headset |
Admin Access: MENU for settings; default remote code 19.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| No dial tone | Line cord loose; power off | Check connections; replug power |
| Cannot pair Bluetooth | Incompatible; out of range | Check compatibility; place near base; restart devices |
| Handset not registered | Deregistered | Place in base or use FIND HS method |
| No ring | Ringer off; volume low | Adjust ringer; check setup |
| Interference | Out of range; devices | Move closer; relocate base |
| Battery not charging | Dirty contacts; depleted | Clean contacts; charge 30 min; replace battery |
Care: Wipe with damp cloth. Dispose batteries properly. Service: 1-800-595-9511.