VTech DM111-2 Digital Audio Baby Monitor User Manual

The VTech DM111-2 Safe & Sound Digital Audio Baby Monitor is a wireless audio system with one baby unit (transmitter) and two parent units (receivers), featuring crystal-clear sound transmission, visual sound indicators, adjustable volume, low battery and out-of-range alerts, and up to 1,000 ft outdoor range. It supports English prompts and is designed for parental supervision in residential settings. Below are the key specifications, setup, operation, features, and troubleshooting instructions. Not a substitute for proper adult supervision.

1. Preparations 2. Description 3. Precautions 4. Specifications 5. Installation 6. Check Operation 7. Operating Features 8. Configuration 9. Troubleshooting

Preparations

Unpack the monitor and ensure all components are present: baby unit, two parent units, power adapter for baby unit, two power adapters for parent units, user's manual. For battery installation in each parent unit: Slide open battery compartment cover, insert 2 AAA alkaline batteries (not included) observing polarity (+/-), replace cover. Units turn on automatically. Batteries provide up to 8 days standby. Remove for long-term storage. Adult setup required.

WARNING! Use only alkaline batteries; do not mix old/new or types. Do not dispose in fire. Save these instructions.

Description

The VTech DM111-2 is a digital audio baby monitor with wireless transmission on 5 channels (1921.536-1928.448 MHz). Features include sound-activated monitoring, visual LED indicators for sound levels, adjustable speaker volume (5 levels), alerts for low battery/out-of-range, belt clip for portability, and standby mode. Baby unit has microphone and power controls; each parent unit has speaker, volume buttons, and indicators. Supports two parent units for multi-room monitoring.

Applications: Audio monitoring for baby sleep/safety; Parental aid in home with dual receivers.

Precautions

CAUTION! Adult setup and supervision required. Test before each use. Keep out of reach of children.

WARNING! Not for medical use or substitute for care. Keep baby unit and cords 3 ft (1 m) from crib/baby to prevent strangulation—never place in crib. Do not use near water; unplug before cleaning. Use only supplied adapters (6V AC 300mA baby, 6V DC 400mA parent). Pacemaker users: Maintain 6-inch distance. Dispose batteries per local regulations. Avoid interference sources.

WARNING! Cords must be out of baby's reach; secure to avoid tripping hazard.

Specifications

Electrical: Frequency: 1921.536-1928.448 MHz (5 channels); Baby adapter: 117V AC 60Hz to 6V AC 300mA; Parent adapter: 100-120V AC 60Hz to 6V DC 400mA.
Batteries: Each parent unit: 2 AAA alkaline (not included); Standby: Up to 8 days.
Range: Up to 1,000 ft (300 m) outdoors, 160 ft (50 m) indoors; Varies by environment.
Operating Ambient: 32°F to 104°F (0°C to 40°C); Humidity: Up to 95% non-condensing.
Dimensions: Not specified.
Other: Visual sound indicators (5 LEDs); Compliance: FCC/IC; Two parent units included.

Installation

Plug baby unit adapter into power jack and unswitched AC outlet; unit turns on (green POWER light). Plug each parent unit adapter into power jack and unswitched AC outlet; units turn on (green POWER/LINK light). For portable use, install batteries in each parent unit. Position baby unit at least 3 ft (1 m) from crib, out of reach, facing baby. Place parent units within range, at least 3 ft from baby unit to avoid feedback. Keep cords inaccessible to children. No wiring required.

Check Operation

Place units in same room. Turn on baby unit (hold POWER until light off then on—green). Turn on parent units (hold POWER until light off then on—green if linked). If flashing, move closer (min 3 ft) and wait 1 min for sync. Speak into baby unit mic; listen on parent unit speakers, check visual indicators light up on both parents.

Operating Features

Monitoring: Parent unit speakers transmit baby sounds; visual indicators (green LEDs 1-3 moderate, red 4-5 high) show levels on both units.
Key Features: Volume adjust (5 levels), low battery alert (flashing red/beeps), out-of-range alert (beeps/searching), standby mode, belt clip.
Alerts: No link (flashing light); feedback if too close.
Power: AC adapters or batteries (parent units only).

Configuration

Adjust via buttons on each parent unit: Volume up/down during use. No menu programming. Both parent units operate independently but sync to the same baby unit.

Setting	Default	Options	Comments
Speaker Volume	Level 3	5 levels (OFF to High)	Press VOL +/- on each parent; beeps at min/max; mute shows visuals
Power Mode	AC	AC/Battery	Insert batteries for portable on each parent

Range optimization: Keep away from interference.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Monitor not responding	Power issue.	Disconnect/reconnect power; remove/reinsert batteries; wait 1 min for sync.
Baby unit POWER light off	No power.	Connect adapter.
Parent unit POWER/LINK light off or flashing	No power/link.	Connect adapter or insert new AAA batteries; move closer.
High-pitched noise	Units too close.	Separate at least 3 ft (1 m).
Reacting to other sounds	Ambient noise pickup.	Lower volume; reposition baby unit.
No sound	Volume low/muted.	Increase volume on affected parent unit.
Beeps repeatedly	Out of range.	Move closer (min 3 ft).
Low battery light flashes	Batteries low.	Replace with 2 new AAA in affected unit.
Sound interruptions	Interference/range.	Avoid electronics; reposition.

Care: Clean with damp cloth; store batteries removed.