The VTech CL A1110 is an analog corded 1-line hotel telephone with speed dial keys, message waiting indicator, adjustable volume, and ringer control. It is line-powered (24V or 48V), designed for reliable performance in hospitality settings. Below are the key specifications, installation, operation, programming, and troubleshooting instructions.
Verify all parts are included: Telephone line cord, telephone base with faceplate and overlay, corded handset. No battery is required as this is a line-powered corded phone. Ensure proper connections before use. Keep away from heat sources, moisture, or vibrations.
CAUTIONS: Use only supplied components. This product should be installed by a qualified technician and connected only to host equipment, not directly to PSTN or POTS. Save these instructions.
Handset Connection: Plug the coiled handset cord into the handset and the base jack.
The CL A1110 is an analog corded 1-line hotel telephone. Base layout: PROGRAM (recessed key), PAUSE (recessed key), +/- VOLUME, Speed Dial keys (11 programmable guest-service keys), DATA port, MESSAGE WAITING LED, Telephone line jack, RINGER VOL, Switch hook, Wall mount clip. Supports speed dialing, voicemail detection, adjustable ringer and volume. Designed for easy installation and reliable use in hospitality environments.
Applications: Hotel telephony; basic corded analog phone.
CAUTION! To prevent electrical shock, unplug before cleaning. Use only in dry locations.
WARNING! Reduce risk of fire/shock: Do not use near water; avoid rough handling. Do not open casing. This product should be installed by a qualified technician and only connected to host equipment. Operate away from heat sources. SAVE THESE INSTRUCTIONS. For pacemaker users: Keep at least 6 inches from the phone.
Desktop: Connect handset cord to handset and base. Plug telephone line cord into base and wall jack. For DSL, use filter. Wall Mount: Rotate wall mount clip, remove/rotate mounting bracket, mount on studs, secure. Ensure all connections are firm.
CAUTIONS: Use supplied cords. Install by qualified technician.
Lift handset for dial tone. Test incoming call: Phone rings, answer with handset. Adjust volume if needed. If no dial tone, check connections and line.
Speed Dial: Lift handset, press PROGRAM, press speed dial key, enter number (up to 21 digits, PAUSE for pauses), press PROGRAM to save. Overrides existing.
Default settings indicated by asterisks (*).
| Setting | Default | Options | Comments |
|---|---|---|---|
| Handset Volume | 2* | 1-4 | During call: +/- VOLUME |
| Ringer Volume | Medium* | Low, Medium, High | RINGER VOL switch |
| Ringer Tone | Tone 1* | Tone 1,2,3 | Admin: Switch under base |
| Flash Duration | 600ms* | 100ms,300ms,600ms | Admin: PROGRAM > FLASH > 1/2/3 |
| Voicemail Detection | Periodic low* | Disable, Periodic low, Steady high | Admin: Jumpers under sticker |
Admin Access: For advanced settings, access recessed keys or jumpers.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| No dial tone | Line cord loose; wiring issue | Check plugs; test with another phone; contact provider |
| Phone does not ring | Ringer off; line issue | Adjust RINGER VOL; test line |
| Interference | DSL; electrical noise | Use DSL filter; relocate |
| Cannot dial out | No dial tone; noise | Check tone; quieter area |
| Hears other calls | Wiring problem | Contact service provider |
Care: Wipe with damp cloth. For service: 1-888-907-2007.