VTech CL-A1110 Analog Classic Lite Phone User Manual

The VTech CL-A1110 is an analog corded 1-line hotel telephone from the Classic Series, featuring a compact design, 11 speed dial keys, message waiting LED indicator, adjustable handset and ringer volume, ringer tone options, mute function, flash for call waiting, voicemail voltage detection, data port, and wall mount capability. It supports basic telephony with voicemail indication and is designed for hospitality environments. Below are the key specifications, installation, operation, programming, and troubleshooting instructions.

Preparations

Unpack the telephone and ensure all components are present: telephone base with faceplate and overlay, corded handset, telephone line cord, mounting bracket. Default settings are indicated by asterisks (*). For installation: Connect coiled handset cord to base and handset. Place away from water, heat sources, and interference. Professional installation recommended for PBX setup. If High Speed Internet Access is available, a DSL filter (not included) is required between the telephone line cord and wall jack.

WARNING! This product should be installed by a qualified technician. Save these instructions.

Description

The VTech CL-A1110 is a compact analog corded 1-line telephone featuring MESSAGE WAITING LED, DATA port, switch hook, wall mount clip, RINGER VOL, speed dial keys, recessed PAUSE and PROGRAM keys, +/- VOLUME. Base includes telephone line jack and supports voicemail voltage detection. Features include speed dial memory (11 locations, up to 16 digits), adjustable earpiece volume (4 levels), ringer volume (low/medium/high) and tone (3 options), flash for call waiting, parallel call sharing, data port for modem/fax. Designed for guest room use.

Applications: Hospitality analog telephony; 1-line corded desk/wall phone.

Precautions

CAUTION! To prevent electrical shock or equipment damage, unplug before installation. Use only standard analog line.

WARNING! Follow safety precautions to reduce risk of fire, electric shock, or injury. Do not use near water; avoid rough handling. Do not open casing. Maintain 6-inch distance from medical devices. Wiring conforms to local codes. Avoid storms or gas leaks. Install by qualified technician only; connect only to host equipment, not directly to PSTN/POTS. Read all instructions and follow warnings on product. Unplug before cleaning with damp cloth (no liquids/aerosols). Avoid use near water, unstable surfaces, or blocking ventilation slots; do not place on soft surfaces, near heat sources, or in unventilated areas. Use only indicated power source. Avoid resting objects on cords or walking on them; do not insert objects into slots or spill liquids. Do not disassemble; service at authorized facility. Unplug if cord damaged, liquid spilled, exposed to water/rain, does not operate normally, dropped, or performance changes. Avoid use during electrical storms or near gas leaks (risk of spark). Hold handset only in normal talk mode near ear. Power adapters for vertical/floor mount only. Use only specified power cord/batteries; do not dispose in fire. For wall mounting, align eyelets with studs and slide down to lock. Keep small metallic objects away from handset receiver.

• WARNING! For use with analog PBX or PSTN lines only.

Specifications

• Electrical: Analog telephony; Power: Line powered 24V or 48V; message waiting signal via steady/periodic high voltage pulse or periodic low voltage pulse.
• Audio: Handset volume adjustable (4 levels); Ringer: 3 tones.
• Memory: 11 speed dials (16 digits each).
• Operating Ambient: 32°F to 104°F (0°C to 40°C); Humidity: Up to 95% non-condensing; operate in properly ventilated areas; avoid water, heat registers, radiators, electrical storms; not for use in flammable gas environments without ventilation.
• Dimensions: Telephone base: 8.66 x 6.02 x 2.56 in (220 x 153 x 65 mm); Handset: 2.23 x 2.15 x 8.24 in (56.74 x 54.56 x 209.40 mm).
• Weight: Not specified.
• Other: Message waiting LED; Languages: English; Compliance: FCC/IC, 2011/65/EU (ROHS).

Installation

Plug telephone line cord into telephone line jack on base and telephone wall jack. If High Speed Internet, install DSL filter (not included) between line cord and wall jack. Desktop: Place on flat surface. Wall mount: Position the eyelets on the telephone base against the mounting studs of the wall plate. Slide the telephone base down on both mounting studs until it locks into place. Connect coiled handset cord to handset and base jack. Ensure installation height under 2 meters. Line-powered; no adapter required.

Check Operation

Lift handset for dial tone. Dial test number, adjust volume with +/- keys. Verify message LED flashes on incoming call simulation. Check ringer by calling from another line. Test parallel sharing if applicable. If no dial tone, check line cord connection, test with another phone.

Operating Features

• Answering Calls: Lift handset; LED flashes during ring.
• Key Features: Volume adjust (VOL +/- during call), ringer vol/tone (switch when idle), parallel call sharing (lift handset to join ongoing call), call waiting (press switch hook to switch), data port (connect modem/fax), message access (LED indicates voicemail).
• Ending Calls: Place handset in base (switch hook).
• Voicemail: LED flashes for new messages; supports voltage detection.

Programming

Speed dials programmed via recessed PROGRAM key. Admin access: Remove faceplate/overlay, lift handset, press PROGRAM.

1. Store Speed Dial: Press PROGRAM > Speed dial key > Enter number (up to 16 digits, PAUSE) > PROGRAM.
2. Dial Speed Dial: Press programmed key (off-hook).
3. Edit: Reprogram as above.
4. Delete: PROGRAM > Speed dial key > PROGRAM (no number).

Changes effective immediately.

Configuration

Adjust via physical switches/jumpers: Volumes, ringer tone, voicemail detection. Defaults: Volume level 2, Tone 1.

Admin Access: Physical switches/jumpers.

Troubleshooting

Care: Wipe with soft damp cloth; avoid liquids.