The VTech CD1113 is a 1-line cordless phone with caller ID, expandable up to 5 handsets, featuring a digital answering system, handset speakerphone, and big button keypad. It includes a base with corded handset and one cordless handset. Below are the key specifications, installation, operation, programming, and troubleshooting instructions.
Verify all parts are included: Base unit, cordless handset, handset charger, power adapter, telephone line cord, battery pack, handset cord, belt clip, quick start guide. Install and charge handset battery before use. Ensure handset is registered to base. Keep handset in charger when not in use. Avoid placing near heat sources, moisture, or vibrations.
CAUTIONS: Use only supplied adapters. Save these instructions.
Handset Battery Installation: Plug the battery connector into the socket inside the handset. Place battery with label THIS SIDE UP. Align cover and slide until it clicks.
The CD1113 is a cordless 1-line phone with digital answering system. Base layout: ANSW ON/OFF, PLAY/STOP, /REPEAT, /SKIP, DELETE, VOL +/-, GREETINGS, CLOCK, FIND HANDSET, IN USE/CHARGE light, handset cradle, telephone line jack, power jack. Handset layout: Earpiece, LCD display, dialing keys (0-9, *, #), VOL +/-, SPEAKER, MUTE, REDIAL/PAUSE, CID/VOL-, DIR/VOL+, FLASH, INT, END/CLEAR, TONE*, CHAN, handset speaker, charging contacts. Supports battery charging, automatic registration. Features: Caller ID with call waiting, 50 name/number phonebook, 25 min answering system. Nominal range: 50 ft indoors, 300 ft outdoors. Designed for easy use.
Applications: Home telephony; cordless phone with answering machine.
CAUTION! To prevent electrical shock, unplug before installation. Use only supplied power adapter.
WARNING! Reduce risk of fire/shock: Do not use near water; avoid rough handling. Do not open casing. Keep 6 inches from medical devices. Use only specified adapter (Input: 120V AC 60 Hz, Output: 6V DC @ 500mA) and battery (Ni-Cd 2.4V 500mAh); risk of explosion if wrong. Dispose batteries per local codes. Operate in 0°C - 50°C, 5%-95% humidity.
Base: Plug power adapter into base and outlet. Plug line cord into base and wall jack. Route cords through base. Connect handset cord to base and handset. For wall mount: Use bracket. Charger: Plug adapter into outlet, place handset for charging/registration (beeps). Expand: Up to 5 handsets; register via INT > HANDSET > ADD. Deregister: INT > HANDSET > REMOVE. Height under 2 meters.
CAUTIONS: Use supplied cords.
Place handset in charger; CHARGE light on (10 hrs full). Press TALK for dial tone, OFF to hang up. Test call: Rings, answer with TALK. Range test: Within 50-300 ft. If no dial tone, unplug/replug 15s. Test answering system: Leave message, play back.
Phonebook: STORE > Enter name/number > SAVE. Speed dial: STORE > # > Location > SAVE. Answering system: Set greeting with GREETINGS; remote code 19. Deregister handset: INT > HANDSET > REMOVE > OK. Battery replace: Open cover, unplug old, insert new Ni-Cd.
Default settings indicated by asterisks (*).
| Setting | Default | Options | Comments |
|---|---|---|---|
| Ringer Volume | 2* | 1-3, Off | Handset: VOL +/- idle |
| Speaker Volume | 4* | 1-8 | During call: VOL +/- |
| Answering Rings | 4* | 2-6, Toll saver | Base: CLOCK > # RINGS |
| Language | English* | English, Español, Français | SETUP > LANGUAGE |
Admin Access: SETUP menu for adjustments.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| No dial tone | Line cord loose; power off | Check cords; plug power |
| Handset not working | Battery low; out of range | Charge 10 hrs; move closer |
| No ring | Ringer off; volume low | Adjust VOL +/-; check setup |
| Interference | Distance; devices | Reduce distance; relocate |
| Battery not charging | Dirty contacts; adapter issue | Clean contacts; check adapter |
Care: Wipe with damp cloth. Dispose batteries properly. Service: 1-800-595-9511.