VTech 914/916 ADL Cordless Phone User Manual

The VTech 914/916 ADL is a 2.4GHz cordless telephone with caller ID (subscription required), phonebook storage (up to 50 entries), redial (last 10 numbers), adjustable ringer and volume, voicemail indicator, and expandable to 12 handsets. It supports English prompts and is designed for simple residential use. Below are the key specifications, installation, operation, programming, and troubleshooting instructions.

1. Preparations 2. Description 3. Precautions 4. Specifications 5. Installation 6. Check Operation 7. Operating Features 8. Programming 9. Configuration 10. Troubleshooting

Preparations

Unpack the phone and ensure all components are present: base unit, cordless handset, battery pack (Ni-MH rechargeable), battery compartment cover, belt clip, telephone line cord, power adapter, user's manual. For battery installation: Insert the battery pack into the handset compartment (label "THIS SIDE UP"), then slide the cover into place. Charge new battery by placing handset in base cradle for 12 hours before first use. Maximum battery life: Up to 7 hours talk time, 7 days standby. Place base away from water, heat sources, and interference sources like microwaves. Expandable to 12 handsets.

WARNING! Failure to read and follow all instructions carefully before installing or operating this control could cause personal injury and/or property damage. Save these instructions.

Description

The VTech 914/916 ADL is a 2.4GHz cordless phone with caller ID (subscription required), phonebook (50 locations), redial (last 10 numbers), adjustable volume (5 levels), ringer (5 melodies/OFF), and any key answer. Supports basic calling, paging, intercom, and voicemail indicator. Handset layouts include dedicated buttons for CID/>, REDIAL/PAUSE, VOL +/-, MUTE. The base has speakerphone; expandable to 12 handsets.

Applications: Residential cordless telephony.

Precautions

CAUTION! To prevent electrical shock/equipment damage, unplug before installation. Use only supplied adapters. If in doubt about wiring, consult qualified electrician.

WARNING! Do not use on circuits exceeding 120V AC; improper use can cause shock/fire. All wiring must conform to local/national electrical codes. Avoid use during storms, near gas leaks, or with medical devices (maintain 6-inch distance). Dispose of batteries per local regulations. Install DSL filter if using DSL/high-speed internet.

WARNING! Use only the power adapters provided with this product: 6V DC @ 400mA.

Specifications

Electrical: Frequency: 2.4GHz; Channels: Auto-select; Power: 120V AC, 60Hz; Adapter: 6V DC @ 400mA.
Batteries: Ni-MH rechargeable, 2.4V 400mAh; Charge time: 12 hours; Talk time: Up to 7 hours; Standby: 7 days.
Range: Up to FCC maximum; Varies by location.
Operating Ambient: 32°F to 104°F (0°C to 40°C); Humidity: Up to 95% non-condensing.
Dimensions: Not specified.
Other: Memory Dialing: 50 entries; Languages: English.

Installation

Plug telephone line cord into base and wall jack (use DSL filter if needed). Plug power adapter into base and unswitched outlet. Install battery in handset (align terminals, snap cover). Place handset in base to charge for 12 hours. For wall mount, attach bracket to base and wall plate, route cords through slots.

Check Operation

After charging, lift handset and listen for dial tone (wait 1-2 seconds). Test by dialing a number and adjusting volume. Verify CHARGE light on base.

Operating Features

Home Screen: LCD shows battery icon, signal strength.
Key Features: Caller ID display, phonebook dialing, redial (10 last numbers), adjustable volume, ringer (5 melodies/OFF), flash for call waiting, any key answer, chain dialing, temporary ringer silence, paging from base, voicemail indicator (service provider).
Paging: Press FIND HANDSET on base (handset beeps 60 seconds).
Voicemail Indicator: Flashing light on base for messages from service provider.

Programming

Access phonebook with /VOL+/ (directory).

Store Numbers: Press PROG > STORE > Enter phone number (up to 30 digits) > SELECT > Enter name (up to 15 characters) > SELECT > Distinct ring Y/N > SELECT.
Dial Stored Number: Press /VOL+/ > Scroll to entry > Press PHONE.
Edit: /VOL+/ > Scroll to entry > SELECT > EDIT > Modify number/name > SELECT.
Delete: /VOL+/ > Scroll to entry > SELECT > DEL > YES.

Caller ID: /VOL-/CID > Scroll > PHONE to dial > SELECT > PROG to save to phonebook.

Changes activate immediately.

Configuration

Adjust via PROG: Date/Time, Ringer, Dial Mode, Home Area Code, Language.

Setting	Default	Options	Comments
Ringer Tone	Tone 1	5 melodies	PROG > RINGER > Ringer tone > Sample > SELECT
Ringer Volume	Medium	OFF/HI/LOW	Hold VOL during idle or PROG > RINGER > Ringer volume
Handset Volume	Level 3	5 levels	Adjust during call
Language	English	English/Spanish	PROG > LANGUAGE
Dial Mode	Tone	Tone/Pulse	PROG > DIAL MODE
Quiet Mode	Off	On (24 hours)	Hold # to toggle
Voicemail Number	None	Up to 30 digits	PROG > VOICEMAIL # > Enter number > SELECT (hold # to retrieve)

Set Time/Date: PROG > DATE/TIME > Enter MM/DD/YY, HH:MM > SELECT.

Clear Voicemail Indicators: PROG > CLR VOICEMAIL > SELECT.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Telephone does not work at all	No power, low battery.	Check adapters, charge 12 hours; unplug/replug power (15 sec); test with another phone.
No dial tone	Wiring issue.	Check line cord; test jack; contact provider for wiring/DSL/VoIP issues.
Poor audio quality	Out of range, interference.	Move closer; press CHAN; avoid electronics; install DSL filter; centralize base.
Cannot store numbers	Memory full (50 max).	Delete entries.
Handset does not ring	Ringer off.	Set ringer ON; check plugs; reinsert battery.
Voicemail indicators persist	Service provider messages.	Use CLR VOICEMAIL feature (does not delete messages).

Handset Registration: Base: Press MENU > Register HS > Place handset in cradle.